WinEQ vs DG Voodoo2 (Crashes vs Background FPS)

Chris1479 · #1 02-15-2023, 10:37 AM

Wiped P99 and reinstalled from scratch after tolerating lots of nagging issues around crashing when logging/relogging/character swapping etc. Very impressed with DG Voodoo2 so far, no more crashes!

However it doesn't fix the background fps problem where EQ lags in the background when you're tabbed out.

Is there any way of fixing this WITHOUT using WinEQ? I'm reluctant to try and put a bandage on a bandage and try to install WinEQ alongside DGVoodoo2 as that's just asking to cause more problems.

ya.dingus · #2 02-16-2023, 09:56 AM

Where did you install dgvoodoo2 from by the by? Can you link to the source?

Treefall · #3 02-16-2023, 10:26 AM

I haven't done or used this but after Googling - have you thought about trying a program that always keeps the window on top (auto hotkey?) as part of EQ's design is to lower its performance when it isn't the top/main window.

I think this would work if you were doing something side by side or had EQ on your secondary monitor, but again I have no experience so maybe it doesn't work.

magnetaress · #4 02-16-2023, 11:21 AM

i have dgvood2 in winxp service pack 2 compat mode works like a charm unless internet hickups bacdly

Stape · #5 02-16-2023, 11:35 AM

As far as I know, there is no fix for the lag while tabbed out. I had problems for years until I installed dgvoodoo and borderless gaming. Also took the Sony folder out of program files and put it just in the drive folder with winxp2 service pack applied. Have not had a crash in nearly a year. I am not sure how well wineq2 works with dgvoodoo, you can try it but if you have bad luck just search for boderless gaming.

Treefall · #6 02-16-2023, 11:46 AM

Quote:

Originally Posted by Stape [You must be logged in to view images. Log in or Register.]

As far as I know, there is no fix for the lag while tabbed out. I had problems for years until I installed dgvoodoo and borderless gaming. Also took the Sony folder out of program files and put it just in the drive folder with winxp2 service pack applied. Have not had a crash in nearly a year. I am not sure how well wineq2 works with dgvoodoo, you can try it but if you have bad luck just search for boderless gaming.

Do you have any issues with borderless getting the Y-Axis off for your mouse?

I installed it to fix pixel crunch and it works, but find that I have to alt+o and re-accept the resolution to get everything aligned again. Fixes pixel crunch/removal still but slightly annoying.

Stape · #7 02-16-2023, 01:25 PM

Quote:

Originally Posted by Treefall [You must be logged in to view images. Log in or Register.]

Do you have any issues with borderless getting the Y-Axis off for your mouse?

I installed it to fix pixel crunch and it works, but find that I have to alt+o and re-accept the resolution to get everything aligned again. Fixes pixel crunch/removal still but slightly annoying.

I do find it off just a tad, about half millimeter on mine. Not enough for me to worry about but I could see how it could cause a problem.

greenskp1999 · #8 02-18-2023, 02:40 AM

what vga card? if you want 60+ FPS, some tweaks are required

greenskp1999 · #9 02-18-2023, 06:27 AM

if you are using Nvidia Driver, try following setting in 3D setting.

1. Max Frame Rate - 288 or
2. Low Latency Mode - Ultra High or
3. Vertical Sync- Fast

PS. If you are using NB and IGP enable, remember to add eqgame to tricker 3D setting.

Chris1479 · #10 02-18-2023, 07:02 AM

Quote:

Originally Posted by greenskp1999 [You must be logged in to view images. Log in or Register.]

if you are using Nvidia Driver, try following setting in 3D setting.

1. Max Frame Rate - 288 or
2. Low Latency Mode - Ultra High or
3. Vertical Sync- Fast

PS. If you are using NB and IGP enable, remember to add eqgame to tricker 3D setting.

Thanks I'll try these. What are NB / IGP enable?