Duxa's All In One Installer Tool

[LizardNecro]

Yes I do:

C:\>dir d:\everquest\uifiles\duxaui
 Volume in drive D is 75Vol
 Volume Serial Number is ACF4-836E

 Directory of d:\everquest\uifiles\duxaui

02/07/2012  12:53 PM    <DIR>          .
02/07/2012  12:53 PM    <DIR>          ..
11/18/2009  05:17 PM           995,031 assist.tga
05/11/2010  09:38 PM           263,205 assist0.tga
05/11/2010  09:38 PM             3,109 assist1.tga
02/23/2011  11:15 PM             5,324 AttackIndicator.tga
05/17/2010  10:07 PM            33,829 Buff_Background.tga
02/23/2011  12:44 PM            65,580 compass.tga
02/04/2010  02:46 PM           196,664 CS_Buttons.bmp
11/18/2009  05:17 PM           440,410 dkblue.tga
02/23/2011  06:05 PM            28,857 EQUI_ActionsWindow.xml
07/20/2010  05:16 PM           305,478 EQUI_Animations.xml
05/26/2010  10:43 AM            11,216 EQUI_BankWnd.xml
01/28/2010  02:04 PM            22,196 EQUI_BigBankWnd.xml
11/13/2007  12:00 PM             9,718 EQUI_BookWindow.xml
03/02/2011  03:20 PM             1,851 EQUI_BreathWindow.xml
07/22/2010  01:27 PM            40,709 EQUI_BuffWindow.xml
etc..

[Chrushev]

Originally Posted by LizardNecro [You must be logged in to view images. Log in or Register.]

Yes I do:

C:\>dir d:\everquest\uifiles\duxaui
 Volume in drive D is 75Vol
 Volume Serial Number is ACF4-836E

 Directory of d:\everquest\uifiles\duxaui

02/07/2012  12:53 PM    <DIR>          .
02/07/2012  12:53 PM    <DIR>          ..
11/18/2009  05:17 PM           995,031 assist.tga
05/11/2010  09:38 PM           263,205 assist0.tga
05/11/2010  09:38 PM             3,109 assist1.tga
02/23/2011  11:15 PM             5,324 AttackIndicator.tga
05/17/2010  10:07 PM            33,829 Buff_Background.tga
02/23/2011  12:44 PM            65,580 compass.tga
02/04/2010  02:46 PM           196,664 CS_Buttons.bmp
11/18/2009  05:17 PM           440,410 dkblue.tga
02/23/2011  06:05 PM            28,857 EQUI_ActionsWindow.xml
07/20/2010  05:16 PM           305,478 EQUI_Animations.xml
05/26/2010  10:43 AM            11,216 EQUI_BankWnd.xml
01/28/2010  02:04 PM            22,196 EQUI_BigBankWnd.xml
11/13/2007  12:00 PM             9,718 EQUI_BookWindow.xml
03/02/2011  03:20 PM             1,851 EQUI_BreathWindow.xml
07/22/2010  01:27 PM            40,709 EQUI_BuffWindow.xml
etc..

That looks correct... no reason it shouldnt work. Is your default UI modified in any way? It does rely on some components of the Default UI to function properly.

[LizardNecro]

Originally Posted by Chrushev [You must be logged in to view images. Log in or Register.]

That looks correct... no reason it shouldnt work. Is your default UI modified in any way? It does rely on some components of the Default UI to function properly.

I've tried the following:
* fresh EQ titanium install, then run your installer.

* fresh EQ titanium install, make changes in the Updating Your UI thread, doing the following:

1. Default - Download the FULL UI >>>here<<< and unzip into your Everquest\uifiles\default folder overwriting all files. This will make sure you have a fresh 'default'. Next download the Project1999 UI updates to make it compatible for this server from >>>here<<< and again, unzip into your Everquest\uifiles\default folder overwriting all files. When you load up Everquest your UI should look like this:

after those steps, then run your installer

The velious UI seems to work fine. When I try /load daxaui there is a pause, and then it goes to default. It looks the the behavior of a corrupt install.

Is there anything I can do to troubleshoot? I could
* zip up the d:\everquest folder and put it somewhere for you to look at
* share my desktop and walk you through my install process live (takes only a few minutes)
* post a step by step guide of what I'm doing with screenshots at each step

Thanks for your help debugging this, I really appreciate it! I really would love to get your UI working [You must be logged in to view images. Log in or Register.]

[Kataro]

Originally Posted by LizardNecro [You must be logged in to view images. Log in or Register.]

I've tried the following:
* fresh EQ titanium install, then run your installer.

* fresh EQ titanium install, make changes in the Updating Your UI thread, doing the following:



after those steps, then run your installer

The velious UI seems to work fine. When I try /load daxaui there is a pause, and then it goes to default. It looks the the behavior of a corrupt install.

Is there anything I can do to troubleshoot? I could
* zip up the d:\everquest folder and put it somewhere for you to look at
* share my desktop and walk you through my install process live (takes only a few minutes)
* post a step by step guide of what I'm doing with screenshots at each step

Thanks for your help debugging this, I really appreciate it! I really would love to get your UI working [You must be logged in to view images. Log in or Register.]

I never did the Updating Your UI thread step and I have never had a problem at all with mine. I even went on EQInterface and found a few little mods from around 2006 that work just fine with the default UI as well.

[Chrushev]

Originally Posted by LizardNecro [You must be logged in to view images. Log in or Register.]

I've tried the following:
* fresh EQ titanium install, then run your installer.

* fresh EQ titanium install, make changes in the Updating Your UI thread, doing the following:



after those steps, then run your installer

The velious UI seems to work fine. When I try /load daxaui there is a pause, and then it goes to default. It looks the the behavior of a corrupt install.

Is there anything I can do to troubleshoot? I could
* zip up the d:\everquest folder and put it somewhere for you to look at
* share my desktop and walk you through my install process live (takes only a few minutes)
* post a step by step guide of what I'm doing with screenshots at each step

Thanks for your help debugging this, I really appreciate it! I really would love to get your UI working [You must be logged in to view images. Log in or Register.]

Hey sorry for the delayed response.

Have you tried installing the UI manually using the link at the very top of the first post on the first page? Here is the link again CLICK ME

[LizardNecro]

Originally Posted by Chrushev [You must be logged in to view images. Log in or Register.]

Hey sorry for the delayed response.

Have you tried installing the UI manually using the link at the very top of the first post on the first page? Here is the link again CLICK ME

I did a full clean reinstall, and did the manual UI install, and that seemed to work. I'm not sure why the other one didn't, but I'll leave it at that! Thank you!

[Chrushev]

Originally Posted by LizardNecro [You must be logged in to view images. Log in or Register.]

I did a full clean reinstall, and did the manual UI install, and that seemed to work. I'm not sure why the other one didn't, but I'll leave it at that! Thank you!

No problem, glad it worked out in the end. Enjoy [You must be logged in to view images. Log in or Register.]