Crashing to login screen

[Bbeta]

Originally Posted by eurekaent [You must be logged in to view images. Log in or Register.]

EDIT: I bit the bullet and changed my CPU clock speed to 4200Mhz (from the base clock of 4700Mhz) in the BIOS. It immediately fixed the problem and I was able to login to P1999 Green again...

System specs:
• AMD - Ryzen 5 7600X 6-core - 12-Thread 4.7GHz
• AMD Radeon RX 7800XT 16GB GDDR6
• MSI MPG B650 EDGE WIFI AM5 ATX Motherboard

now download ryeznmaster and click Apply - under the default Control mode profile - this ill keep your bio's setting to 4.2 max - but you will go back to default speeds. Titanium only reads what your bio's is capped too - you can run 4.7+


im a ryzen 9 7900x
bios capped at 4.2 - running ryeznmaster software resets to deufalt speeds - crusing at 5.7 max and P99 loves it

[Khaleesi]

Originally Posted by Bbeta [You must be logged in to view images. Log in or Register.]

now download ryeznmaster and click Apply - under the default Control mode profile - this ill keep your bio's setting to 4.2 max - but you will go back to default speeds. Titanium only reads what your bio's is capped too - you can run 4.7+


im a ryzen 9 7900x
bios capped at 4.2 - running ryeznmaster software resets to deufalt speeds - crusing at 5.7 max and P99 loves it

A more elegant solution would be to set BIOS as you want/can/need desired then use software profiling to downclock to 4175 on EverQuest client launch

or lesser so use as Ryzen Master - basic view > manual Control mode and reduce the speed to 4175mhz then run the game


Oooor developers could patch in a fix!
Either way unless I have missed it a sticky on this that if nothing else said AMD users(or is it instruction language based?) do not operate over 4.2ghz or X symptoms will occur

It would at least help players understand what is occurring

[JJRMalice]

Originally Posted by Bbeta [You must be logged in to view images. Log in or Register.]

now download ryeznmaster and click Apply - under the default Control mode profile - this ill keep your bio's setting to 4.2 max - but you will go back to default speeds. Titanium only reads what your bio's is capped too - you can run 4.7+


im a ryzen 9 7900x
bios capped at 4.2 - running ryeznmaster software resets to deufalt speeds - crusing at 5.7 max and P99 loves it

We got similar set ups here. Sorry for asking but I am very unsure of the settings you mean. When in BIOS it seems like clock speed is a combination of the other settings. What did you change exactly to get it down to 4.2GHZ?

Trying to use your fix because it seems to be the most logical.