Building a PC...maybe

**Rogean** · #1 01-22-2017, 08:13 AM

I did have one issue during build. The case doesn't have a whole lot of clearance at the top for the radiator and fans. The left fan ended up hitting the motherboard. I removed the armoring on the board, and it still hit the heatsink. So I had to get a little crafty.

[You must be logged in to view images. Log in or Register.]

Once the board was fully screwed in it also lowered it a little so fan blade doesn't touch it at all.

pasi · #2 01-23-2017, 06:58 PM

Quote:

Originally Posted by Rogean [You must be logged in to view images. Log in or Register.]

I did have one issue during build. The case doesn't have a whole lot of clearance at the top for the radiator and fans. The left fan ended up hitting the motherboard. I removed the armoring on the board, and it still hit the heatsink. So I had to get a little crafty.

[You must be logged in to view images. Log in or Register.]

Once the board was fully screwed in it also lowered it a little so fan blade doesn't touch it at all.

Quote:

Originally Posted by pasi [You must be logged in to view images. Log in or Register.]

Rog I don't know much about that case, but if it's a Mid ATX and has an attic for the radiator, you're going to have some fun with a H115i.

I know that struggle. I'd probably go with a 100i or 110i in the future (or if I had to do it all again).