[Savok]

You need dgVoodoo2 for laptops that have both CPU and Nvidia graphics card. The instructions are pretty straight forward.

Some laptops containing hybrid graphics, with discrete graphics processing capabilities, often do not get utilized by the PC Client. This is due to the graphics in the older PC client being based on MS DirectX 8. A DirectX wrapper has been found that can successfully enable use of the discrete GPU, over the slower on board graphics. You can download the wrapper at dgVoodoo2. Versions 2.54 and newer have been successfully tested on AMD and NVidia based hybrid graphics on several systems under Windows 7 & 10. Password to extract the file is typically either 'dege' or can also be 'shitgoogle' if one is set. Try to download a regular usage version which doesn't have a password set.

To install the wrapper, you need to open the downloaded zip file, and copy the D3D9.dll file found in the MS subfolder, and put this in the same folder as your eqgame.exe. Then just run the eqgame.exe normally. DO NOT PUT THIS FILE IN YOUR WINDOWS SYSTEM FOLDER!!! When you go into the options to select your graphics card, it will typically have a generic description for the wrapped dgVoodoo card like "\DISPLAY1". After selecting this display adapter, the game should run normally, with the exception of changing screen resolutions. If you change the display resolution in game, it WILL crash the client. So only do this in a safe location. You can optionally change the resolution by hand in the eqgame.ini.

If the wrapper is loaded, in game it will have a "dgVoodoo" watermark in the lower right corner of the display. The performance difference is usually very noticeable. But if you want to be sure, you can use software such as GPU-Z, to monitor the load on the discrete graphics card.

It is possible to remove the watermark if you wish to edit the file information.