View Full Version : Pitted iron ring
rdavidson
12-07-2020, 04:07 PM
Does anyone know if it is possible to obtain this ring with a 200 in blacksmithing? I have all but maxed jewelry making, which now limits my ability to go over 200 in smithing. Any info would help greatly. Plz pm
Damarous
12-07-2020, 06:15 PM
Yes. Being below trivial just means that there is a chance of failure higher than the global 5% chance. You can still do it, and I think at even like 184ish it's an 80-90% success rate.
elwing
12-08-2020, 12:47 AM
Beware through, you're looking at a 19 combine chain... With 212 you're looking at 35 or so % chance of success... Trying this at only 200 will reduce your chance further... But not much, a good deal of the first combines will also be at max success rate at 200,only the last few combines will not be maxxed.. Still, you're probably looking at 4-5 attempts
Ostepop
12-12-2020, 03:05 PM
The final combine has a trivial of 160. It's possible to buy an MQ of the difficult stuff and get down to (if the trivial charts on the wiki are correct) 5% fail rate at 165 ish skill.
elwing
12-12-2020, 03:08 PM
95% at 163 for the final combine if you buy a blade mq...
jbel123
12-17-2020, 02:47 AM
i've done the quest twice now with 200 and didn't fail the final combine either time.
funnily enough, I failed one of the earlier combines once.
they're all 5% chances of failure, so it's always possible. but 200 is worth the effort, IMO
elwing
12-17-2020, 02:53 AM
Yep, definitely doable at 200,the impact is not so high as the quest page makes it, due to the fact that a good share of the 19 or so combine are trvial at 200...
But even at 212 you're still doing at an avg success rate of 1/3 for the blade
elwing
12-17-2020, 02:59 AM
0.95^19=0.377... 37% is the avg if all are trivial.
For reference, I already failed at splitting the ore and at dusting the blocks... I haven't failed at clay coating, but I have failed on prrtty much all other combines.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.