Extreme frustration

[Gandite]

error: quick connect to p1999 has failed going to the server select instead


error: a timeout has occurred


What the fucking fuck. I can't directly connect to the server and I cannot get to the server select because it is constantly timing out. This has been happening more and more frequently. The eqemu site shows the login is up and working so what gives?

[Qaedain]

Forwarded some ports for all of that?

[Gandite]

Nice I was just able to finally get to character select. Click Enter World and hey nice right back at the login screen. Rubbish.

[Gandite]

Forwarded some ports for all of that?

What ports do I have to forward? Neither the EQ emu setup guide or the p1999 setup guide mentions anything about port forwarding.

[Koota]

Hope this helps.

I can log into the Server Select screen, but when I get there, no servers are showing up. It is just a blank list.
This usually means there is a network problem. Either your network is blocking port 5998 or your router may just be having issues that need to be corrected. If you live in a dorm or are playing from a public network, it is probably going through a proxy and that means they are most likely blocking port 5998, so you won't be able to play. If you are playing from home and have control of your internet connection, then the problem is probably either with your router/modem or with your PC. First, make sure that you don't have a firewall or any other security programs running that might block your connectivity in any way. Next, make sure you aren't forwarding port 5998 to any PCs on your network (this includes port range forwarding that would include port 5998 in the range). If not, next you want to try powering down your modem and router. Then power up your modem and wait until it gets a connection. Next, power up your router and wait for it to connect. Last, reboot your PC and try connecting to EQEmu again. If that still isn't working, then there is a good chance that you need to reset your router or router/modem back to factory defaults. Most modems have a sunken in button that you can hold down to reset it to defaults. Check your product documentation for how to do it. Once that is done, set up your router again and try connecting to EQEmu again. It should be working now, but if not, there may be an issue with the routing from your ISP or your router may just be going bad.

I can log into the Server Select screen, but when I try to connect, the screen goes black and then goes to the login screen again.
There are multiple reasons that could be causing this. Here are some of them:

1. Most likely you are running the wrong version of Everquest. Only Legal copies of Everquest Titanium or Secrets of Faydwer completely unpatched will work.
2. You may want to try other servers to make sure that it isn't a problem on that particular server.
3. If you live in a dorm or are playing at work, you might be using a proxy that is blocking port 5998, which means you won't be able to connect.
4. If you are running a P2P or Torrent program, it might be using all of your bandwidth. Try turning them all off.
5. You may have a firewall that is blocking EQ. Disable all firewalls.
6. If you are running a Dual Core CPU or Windows Vista, you will probably need to read the following post and apply at least one of the fixes listed in it: http://www.eqemulator.net/forums/showthread.php?t=25327∞
7. You may need to adjust your Windows Desktop and/or your Everquest Resolution settings.
8. Make sure your drivers are up to date for your Video Card.
9. If you have sound enabled, make sure your sound card is working.
10. Try resetting your router. If that doesn't help, try connecting your PC directly to your cable/dsl modem and see if that helps.
11. If you previously had another version of EQ installed and installed SoF over the old install (even if you uninstalled EQ before-hand), you will need to uninstall EQ again and delete the Everquest install folder completely, and then install SoF again from scratch. Otherwise, simply installing SoF to a new/different folder than your current EQ install works just fine.

[Qaedain]

Conversely, make sure that port 5998 is forwarded to your PC.

[Gandite]

Conversely, make sure that port 5998 is forwarded to your PC.

I've done this and it has not helped.

[Simplistik]

Enable dmz on your pc through your router if it doesn't work then its not a port issue, but chances are it will.

[Uaellaen]

Enable dmz on your pc through your router if it doesn't work then its not a port issue, but chances are it will.

are you freakin insane!! dont turn off your firewall and enable DMZ!!:eek:

[Simplistik]

The man wants to play EQ for sake of trouble shooting ports its fine for temporary purposes. heh

[Gandite]

The man wants to play EQ for sake of trouble shooting ports its fine for temporary purposes. heh

The thing is my problems are infrequent. There are times when I log in and the server screen pops right up, and other times where it times out for hours and I can do nothing.

Right now I'm not playing animations. I'm being told it has to do with my dual core but I never used to have this problem. Its cropped up in the last week or two same with the ping of 4000.

[Overcast]

You can use this to verify your ports are open to the web...


https://www.grc.com/x/ne.dll?bh0bkyd2

[Gandite]

Ok I can confirm that opening that port has done nothing. Cannot quick connect, and login server is continually timing out.

[Swishahouse]

Enable dmz on your pc through your router if it doesn't work then its not a port issue, but chances are it will.


bro it worked perfectly!!!

nevermind that irc client and torrent daemon or all your friends bitching about you spamming them .....



http://memegenerator.net/Socially-Akward-Penguin/ImageMacro/1536330/Socially-Akward-Penguin-I-GOT-ROOT-BITCHES.jpg

[Gandite]

I'm trying WinEQ2 to see if it can help with some of my problems but I've hit an interesting snag. Currently if I load eq via wineq2 I cannot get to the login screen and it times out every time. However if I load EQ normally I get right to the server select.

Anything special about wineq2 I should know?

[Overcast]

I'm trying WinEQ2 to see if it can help with some of my problems but I've hit an interesting snag. Currently if I load eq via wineq2 I cannot get to the login screen and it times out every time. However if I load EQ normally I get right to the server select.

Anything special about wineq2 I should know?

Nothing that I know of - I did a normal EQ Titanium install - created a WinEQ2 account, logged into it and it found EQ np.

[raptorak]

I'm getting the same problem - no idea why :(